Pinasco Racing Crank for Wideframe Vespas - 57mm stroke


This strong beautifully made bell-shaped Pinasco Racing crank will fit any Vespa wideframe engine that uses a 54mm (125cc) or 57mm (150cc) stroke crankshaft.

The con rod length is 110mm and will fit the casings without modification however if fitting to a 125cc engine then you will need to change to a 150cc barrel and piston, either standard or this crank is the perfect companion to the Bollag Motos 151 kit or the Pinasco 160cc kit - If you are unsure of fitment to your particular engine please contact us and we will be able to offer assistance regarding the compatibilty with your engine.

The small end uses a roller needle bearing instead of the standard bronze bush used on original spec crankshafts, this means that the oil ratio can be reduced to 2% from the standard 5% mixture.

This will fit the following engines:

Douglas: GL2, 42L2, 92L2, 102L2, Clubman, Continental.

Piaggio: VM1, VM2, VL1-3, VN. VB1

MotoVespa (Spanish): 125N, 125S 1954-1959

ACMA (French): 125 1953-1959, GL150

Earn 0 reward points
£0.00 £219.00
Out Of Stock
Add To Wishlist